Epoxy Resin Kit 1 Gallon each Part A & Part B
Just before use, Components A and B shall be mixed in a one-to-one ratio by volume. When an automatic proportioning and mixing machine is used, the temperature of the components shall be maintained by indirect heating or cooling, so that the adhesive will meter, mix, and extrude properly. The maximum temperature shall be such that after mixing there shall be no excess flow of adhesive from under that marker. These epoxy adhesives are manufactured to the current State of California specifications for Standard Set Epoxy Adhesive For Pavement Markers on composition and performance characteristics. Dry time at 77 degrees F is 28 minutes.